GDUD-PBI Ultrasonic Flaw Detector for Electrical Equipment
It detects internal flaws of electrical equipment, such as bushings, bus bars, wire clamps, transformer tank, current&voltage transformers, surge arresters, generator bearing equipment, and porcelain pillar type insulators, etc.
● TFT true color screen.
● High accuracy and wide applications.
● High sensitivity of flaw detection, up to 110db.
● Built-in standard curves and test block for pillar type insulators. The device alarms if internal crackle flaws are super-standard.
● Automatic calibrations for probe and curvature surface, which optimizes the coupling between the probe and test object and ensures accuracy.
● Aluminum alloy chassis, which has excellent anti-interference performance. Low noise and high signal-to-noise ratio.
Specification
● Working frequency: 0.5~20 MHz
● Gain adjustment: 110dB (manual 0.1dB/2dB/6 dB step-wise)
● Detection range: 0~9999mm longitudinal wave (steel)
● Velocity Range: 0 ~ 9000 m/s
● Dynamic range: ≥ 32dB
● Vertical linearity error: ≤ 3%
● Horizontal linearity error: ≤ 0.1%
● Resolution: > 42dB (5P14)
● Surplus sensitivity: > 62dB (200mmΦ2 depth, flat-bottom hole)
● Data saving capacity: 21 groups of detection data, 1000 echoes
● Power supply/voltage: DC 7.4V lithium battery, continuous working for 12 hours; AC220V
● Environmental temperature: -25 to 50° C
● Related humidity: 20%-95% RH
● Dimensions: 210*168*50(mm)
● Weight: 1.8kg (including built-in battery)
